Rubber

– Dirt (retained on 45-micron aperture) (% wt): 0.02% max

– Ash (%wt): 0.40% max

– Nitrogen (%wt): 0.60% max

– Volatile matter (%wt): 0.80% max

– Initial Wallace Plasticity (Po): –

– Plasticity Retention Index (PRI): 60 min

– Mooney Viscosity: 60 ± 5

– Packing: In loose bale or wooden pallet

– Port of loading: Hochiminh, Vietnam

– Origin: Vietnam

– Contaminant content retained on 45m sieve (% m/m): 0.03% maximum
– Ash content (% m/m): up to 0.50%
– Nitrogen content (% m/m): up to 0.60%
– Volatile matter content (% m/m): up to 0.80%
– End ductility (Po): minimum 35
– Plasticity retention index (PRI): minimum 60
– Packing: By bags or wooden pallets
– Delivery port: Ho Chi Minh, Vietnam
– Made in Viet Nam

– Dirt (retained on 45-micron aperture) (% wt): 0.08% max

– Ash (%wt): 0.60% max

– Nitrogen (%wt): 0.60% max

– Volatile matter (%wt): 0.80% max

– Initial Wallace Plasticity (Po): 30 min

– Plasticity Retention Index (PRI): 50 min

– Packing: In loose bale or wooden pallet

– Port of loading: Hochiminh, Vietnam

– Origin: Vietnam

– Rubber mold: Slight

– Wrapping mold: Slight

– Opaque spots: Slight

– Over Smoked spots: No

– Oxidized spots: No

– Burnt Sheet: No

– Dry mould no more than 10%, clean, dry, strong, small-scattered bubbles, specks of bark, free from blemishes, sand, foreign matter, under-cured

– Packing: PE bag

– Port of loading: Hochiminh, Vietnam

– Origin: Vietnam

– Total Solids Content (%wt): 61% min

– Dry Rubber Content (%wt): 60% min

– Non-Rubber Solids (%wt): 1.7% max

– Alkalinity (as NH3): 0.6 min

– Mechanical Stability Time (MST): 650 min

– Volatile Fatty Acid (VFA) number: 0.06 max

– Potassium (KOH) number: 0.07 max

– Port of loading: Hochiminh, Vietnam

– Origin: Vietnam